2023/2/26/ / Last updated : 2023/3/20/ Gene Summary of DHCP Server Placement In principle, the DHCP server and client must be on the same network; this section summarizes how to place the DHCP server.
2022/11/7/ / Last updated : 2023/3/16/ Gene DHCP Relay Agent Configuration Example [Cisco] Enable DHCP Relay Agent on Cisco routers (Cisco IOS). This allows a single DHCP server to support DHCP clients on multiple networks.
2022/11/4/ / Last updated : 2023/3/15/ Gene DHCP Relay Agent In principle, the DHCP server and DHCP clients must be connected on the same network. The DHCP Relay Agent is the function to avoid this restriction. This section explains how the DHCP Relay Agent works and the configuration commands on a Cisco router (Cisco IOS).
2022/10/31/ / Last updated : 2023/3/13/ Gene Cisco IOS DHCP Server Configuration and Verification Commands You can use a Cisco router as a DHCP server to distribute IP addresses to DHCP clients.This section describes the configuration and verification commands to make a Cisco router (Cisco IOS) act as a DHCP server.
2022/2/10/ / Last updated : 2023/3/9/ Gene Cisco IOS Name Resolution Configuration Name resolution must be configured for communication by specifying the host name instead of the IP address. This section describes the configuration of name resolution on Cisco IOS.
2021/11/19/ / Last updated : 2022/3/30/ Gene Cisco VLAN Detailed Configuration Example This is an example of VLAN configuration in Cisco. The detailed step-by-step procedure will help you create a separate network with VLANs.
2021/8/16/ / Last updated : 2021/9/4/ Gene OSPF Area Type There are several types of OSPF areas, and this section explains the characteristics of the OSPF area types.
2021/8/11/ / Last updated : 2021/9/24/ Gene Synchronization process of OSPF LSDB This section describes the LSDB synchronization process between two OSPF routers that are adjacency on Ethernet.
2021/8/5/ / Last updated : 2021/9/13/ Gene Details of enabling OSPF on the interface Routing protocols such as OSPF are enabled on the router interface. This section explains in detail about enabling OSPF on the router interface.
2021/8/3/ / Last updated : 2021/8/6/ Gene How show ip ospf neighbor looks on Ethernet Configure OSPF on the four Cisco routers on the Ethernet and make sure that they are only adjacent with DR.
