2009/6/29/ / Last updated : 2021/9/16/ Gene Cisco(シスコ) Overview of LSA Filters for OSPF – Filter LSA Type 3/Type 5 The route filters in OSPF are LSA type 3 and LSA type 5 filters. This section provides an overview of LSA type 3/LSA type 5 filters.
2006/7/7/ / Last updated : 2021/9/9/ Gene Cisco(シスコ) Limitation of OSPF redistribution routes – redistribute maximum-prefix command The redistribute maximum-prefix command is used to prevent an unexpectedly large amount of route information from being redistributed to OSPF. This section describes the redistribute maximum-prefix command.
2006/5/12/ / Last updated : 2023/2/7/ Gene Cisco(シスコ) BGP Selective Aggregation : unsuppress-map The unsuppress-map allows you to determine which pre-aggregation routes to advertise along with the aggregation routes for each neighbor.
2006/4/30/ / Last updated : 2023/2/6/ Gene Cisco(シスコ) BGP Selective Aggregation : suppress-map This section describes the suppress-map option of the aggregate-address command for selective aggregation. suppress-map option allows you to determine the pre-aggregation routes that are not advertised.
2006/4/23/ / Last updated : 2023/2/2/ Gene Cisco(シスコ) BGP Selective Aggregation Overview When BGP aggregates routes, not only the aggregated route is advertised, but also the individual routes before the aggregation. Selective Aggregation allows control over which pre-aggregation routes are advertised along with the aggregate route.
2006/4/16/ / Last updated : 2023/1/30/ Gene Cisco(シスコ) aggregte-address command : advertise-map opiton This section describes advertise-map, an option of the aggregate-address command that generates BGP aggregate routes.
2006/4/12/ / Last updated : 2023/1/30/ Gene Cisco(シスコ) aggregte-address command : as-set opiton The as-set is an option for “what to do with the attributes of the aggregate route”. The as-set option allows the aggregate route to inherit attributes of the pre-aggregate routes.
2006/4/2/ / Last updated : 2023/1/25/ Gene Cisco(シスコ) aggregte-address command : attribute-map opiton The attribute-map is an option for “what to do with the attributes of the aggregate route”. The attribute-map allows attributes to be added to the aggregate route.
2006/3/27/ / Last updated : 2023/1/23/ Gene Cisco(シスコ) aggregte-address command : summary-only opiton The summary-only option is an option regarding “how to handle routes pre-aggregation”. The option summary-only advertises only aggregate route. This section describes the summary-only option in more detail.
2006/3/14/ / Last updated : 2021/8/13/ Gene Cisco(シスコ) OSPF Route Summary and Configuration In OSPF, route summary can be performed with ABR and ASBR. This section explains the mechanism of route summary with ABR/ASBR in OSPF and the configuration commands on Cisco routers.
