2022/10/14/ / Last updated : 2022/11/10/ Gene BGP Route Filter : prefix-list Configuration Example The following is an example of configuring BGP route filter with prefix-list. Configure the same conditions with prefix-list as with distribut-list filter.
2022/10/13/ / Last updated : 2022/12/12/ Gene BGP Route Filter : prefix-list This section describes the configuration and verification commands for the BGP route filter using prefix-list. The prefix-list identifies BGP routes to be filtered by network address and subnet mask.
2022/10/12/ / Last updated : 2022/11/7/ Gene BGP Route Filter : distribute-list Configuration Example This is an example of BGP route filter configuration using distribute-list. BGP routes to be filtered are identified with both standard and extended ACLs.
2022/10/10/ / Last updated : 2022/11/4/ Gene BGP Route Filter : distribute-list This section describes the commands for configuring and verifying the BGP route filter using distribute-list. The distribute-list identifies the BGP route information with ACL to be allowed or denied.
2022/10/7/ / Last updated : 2022/10/31/ Gene BGP Route Filter Overview It is possible to filter when advertising and receiving route information to and from a specified neighbor with BGP. “How to identify the route information” is important in route filtering with BGP.
2022/9/7/ / Last updated : 2022/9/20/ Gene DMVPN with FVRF Configuration Example Part2 n VRF-aware DMVPN with FVRF, a new site is to be added. Here is an example of a router configuration for a new site. A series of configurations related to VRF-aware DMVPNs all together.
2022/9/6/ / Last updated : 2022/9/20/ Gene DMVPN with FVRF Configuration Example Part1 This is an example of VRF-aware DMVPN configuration that uses FVRF. Understand the meaning of configuring NHRP with multipoint GRE tunnels.
2022/9/5/ / Last updated : 2022/9/15/ Gene DMVPN with FVRF Consider the configuration for separating underlay and overlay networks with FVRF in DMVPN (Dynamic Multipoint VPN) Internet VPN .
2022/9/2/ / Last updated : 2022/9/14/ Gene IPSec VTI with FVRF Configuration Example This is an example of a VRF-aware IPSec VTI configuration that uses FVRF. Please make sure you understand that “IPSec communication is performed in the FVRF (underlay network)” and configure it accordingly.
2022/9/1/ / Last updated : 2022/9/13/ Gene IPSec VTI with FVRF In order to use VRF-aware IPSec VTI, the configuration must properly account for IPSec communication with the VPN gateway on the underlay network (FVRF).
